Pool Pumps

Swimming pool sanitation refers to both visual clarity and levels of microflora, such as bacteria and viruses in swimming pools. The goal of sanitation is to prevent the spread of diseases and pathogens between users. more...

Home
Bath
Bedding
Furniture
Gardening & Plants
Home Decor
Lamps, Lighting, Ceiling...
Patio & Grilling
Pools & Spas
Other Pool & Spa Accessories
Pool & Spa Covers
Pool Chemicals, Chlorine
Pool Cleaners
Pool Filters
Pool Floats, Rafts
Pool Heaters & Solar Panels
Pool Liners
Pool Pumps
Pool Toys & Games
Pools
Saunas
Spas, Hot Tubs
Rugs & Carpets

Unsanitized water may also support the growth of algae which will present as a greenish tinge initially, then if left unchecked may completely inhabit the pool water displaying a solid green murky appearance. A rule of thumb is that the water should be sufficiently clear to permit the main drain to be clearly visible from the pool deck at all distances up to ten meters (eleven yards) in a horizontal direction from the projection of the drain on the pool surface. This, however, is merely to be considered a negative indicator, not a guarantee that the pool water is properly sanitized. Swimming pool water can still be contaminated with microscopic organisms, even though it is visually clear. The United States Environmental Protection Agency therefore issued the recreational water standards a few years ago to restrain the bacterial problem. With the similar objective as EPA, the International Organization for Standardization published the standards of ISO 15553 recently.

Only pools and spas that contain filtrated and disinfected water can be considered safe places to swim. Poor pool maintenance may lead to low levels of disinfectants and clogged filters that may place swimmers at risk for diseases and infections. The only way to ensure proper sanitation is to test the swimming pool water with a pool water test kit and fresh reagents.

Typical filtration equipment used in private swimming pools

Water pump

An electrically operated water pump is the prime motivator in recirculating the water from the pool. Water is forced through a filter and then returned to the pool. A typical pool pump uses 500 watts to 2,000 Kilowatts. Pumps are typical run for 4 hours per day in winter (when the pool is not in use) and up to 24 hours in summer. To save electricity costs most people run for between 6 hours and 12 hours in summer with the pump being controlled by an electronic timer.

Some pool pumps have two motor speeds to reduce power consumption at times when full power is not needed. Other pump manufacturers (typically Italian or other European) have redesigned their units to use a smaller electric motor with heavier windings, therefore consuming less energy, to power a larger pump impeller.

Pool pumps typically are \"self priming\": they may be positioned above the mean water level of the pool yet still start up and function after a timed rest period. Pumps that do not \"self prime\" are termed \"flooded suction\" and must be gravity fed by the pool by being located below the mean level of the pool water.

Read more at Wikipedia.org